CHASSIS
3-12 Z580/Z593/Z595 Diesel Service Manual
3
3. Position the hose clamp and tighten (Fig. 044). 5. Loosely install a bolt, lock-washer, and washer
through the frame and into the front left corner of the
fuel tank (Fig. 046).
Fig 044 IMG_7783
Fig 046 IMG_7788
6. Loosely install a washer, spring and nut onto each
of the three studs on the underside of the fuel tank
(Fig. 047).
4. Slide a hose clamp onto the intake fuel line. Slide
the intake fuel line onto the fi tting located on the
bottom of the fuel tank. Position the hose clamp and
tighten (Fig. 045).
Fig 047 rh fuel tank fasteners
Fig 045 IMG_7787a
A. Fuel tank C. Mounting stud fastener
B. Frame assembly (3)
C
B
B
A
C
C