CHASSIS
3-36 Z580/Z593/Z595 Diesel Service Manual
3
6. Remove the 2 bolts and nuts securing the right side
fl ange bearing to the frame. Remove the fl ange
bearing from the cross shaft (Fig. 137).
Fig 137 PICT-2958a
7. Remove the 2 bolts and nuts securing the left side
fl ange bearing to the frame. Remove the fl ange
bearing from the cross shaft (Fig. 138).
Fig 138 PICT-2960
4. Remove the clevis spring pins securing the brake
rod linkage yokes to the left side of the brake cross
shaft (Fig. 135).
Fig 135 PICT-2954
5. Remove the clevis spring pin securing the brake rod
linkage yoke to the right side of the brake cross shaft
(Fig. 136).
Fig 136 PICT-2956
To Next Page
Loading...
