HYDRAULIC SYSTEM
4-4 Z580/Z593/Z595 Diesel Service Manual
4
15. Remove the hose clamp located on the hydraulic
suction hose coming from the oil fi lter (Fig. 248).
17. Raise the rear of the unit and remove both right and
left rear tires.
18. Mark or tag the wheel motor hydraulic hoses and
fi ttings to ensure they are reconnected correctly.
19. Remove the two hydraulic hoses from the right
wheel motor (Fig. 250).
Fig 248 PICT-3202
Fig 250 PICT-3217
20. Cap the hydraulic hoses and fi ttings (Fig. 251).
16. Remove the hydraulic suction hose from the fi tting
on top of the hydrostatic pump (Fig. 249).
Note: When removing hydraulic hoses from the
pump, cap the hose end and the fi tting on the
hydrostatic pump to ensure dirt and debris
does not enter the system.
Fig 251 PICT-3207
Fig 249 PICT-3203a
To Next Page
Loading...
