Toro ECx - Setting An Interval Schedule

16
Turn the control dial to the SET TIME/DAY position.
The hour digits will begin flashing.
To set the current hour (and
AM/PM), press the +/ON
button to scroll forward or the –/OFF button to scroll
backward.
Note: The display will begin to change rapidly if
either button is held down for more than two sec-
onds.
Press the
NEXT button. The minute digits will begin
flashing.
To set the current minute, press the
+/ON button to
scroll forward or the
–/OFF button to scroll backward.
Press the
NEXT button. The weekday abbreviation
will begin flashing.
To set the current day of the week, press the
+/ON
button to scroll forward or the –/OFF button to scroll
backward until the current day is displayed.
The weekday abbreviations are as follows:
SU (Sunday) MO (Monday)
TU (Tuesday) WE (Wednesday)
TH (Thursday) FR (Friday) SA (Saturday)
When the current time and day are displayed, return
the control dial to the
AUTO/ON position.
7
6
5
4
3
2
1
Setting The Current Time and Day
Programmimg The Timer
1
2
2 4
4
3 5
6
2 4 6
5 6
7
3
SU
1
MANUAL
START
AUTO / ON
SET TIME / DAY
SET ZONE
RUN TIMES
SEASON
ADJUST
OFF
RAIN
DELAY
SET
WATERING
DAYS
SET
PROGRAM
START
TIMES
ON
NEXT
OFF
PROGRAMS