For each program, you can select Calendar, Interval or
Off. To set a Calendar schedule, continue here. To set
an Interval schedule see page 18. To turn Off a program
see page 19.
Setting A Calendar Schedule
Turn the control dial to the SET WATERING DAYS
position.
Check the
PROGRAMS switch setting. If necessary,
reposition the switch to select the desired program.
The current watering schedule will be displayed:
CAL for Calendar, Int for Interval or OFF
• If CAL is flashing, continue at step .
• If Int or OFF is flashing, press the +/ON or –/OFF
button to select CAL, then continue at step .
Press the NEXT button. The watering days currently
set for this program will be displayed.
SU (Sunday)
will begin flashing.
To select Sunday as a watering day, press the
+/ON
button. To remove Sunday from the schedule, press
the
–/OFF button. MO (Monday) will now begin flash-
ing. Continue to select or remove each day of the
week until only the desired watering days are shown.
6. To set a Calendar schedule for another program,
repeat all of the steps beginning at step .
When you have completed setting the Calendar
schedule for each program (as needed) return the
control dial to the
AUTO/ON position.
To Next Page
Loading...
Need help?
General
