Greensmaster Flex 1800/1820/2100/2120 Page 7 − 1 Cutting Unit
Chapter 7
Cutting Unit
Table of Contents
SPECIFICATIONS 2............................
GENERAL INFORMATION 3.....................
Operator’s Manual 3..........................
Supporting Cutting Unit when Servicing 3........
Separating Cutting Unit from Traction Unit 4......
SPECIAL TOOLS 5.............................
FACTORS THAT CAN AFFECT QUALITY
OF CUT 8....................................
ADJUSTMENTS 10.............................
Leveling Rear Roller 10........................
SERVICE AND REPAIRS 11.....................
Backlapping 11...............................
Bedbar Assembly 12..........................
Bedknife Replacement and Grinding 14..........
Bedbar Adjuster Service 16....................
Reel Assembly 18.............................
Reel Assembly Service 22.....................
Preparing Reel for Grinding 24.................
Front Roller 25...............................
Rear Roller 26................................
Roller Service 28.............................
NOTE: This chapter includes service information for
Flex cutting units with serial number above 312000000.
If an older production Flex cutting unit (serial number be-
low 312000000) has been installed on a newer Flex 21
traction unit, use information from the appropriate Flex
21 service manual when servicing that cutting unit.
Cutting Unit
To Next Page
Loading...
