Toro groundsmaster 455-D - Hydraulic System Maintenance; Hydraulic Filter Replacement and Test Port Checks

.0149 - Cylinder Head Separating Levers
(Make Locally)
Used to remove cylinder head (qty. 2 required).
Units: mm
Figure 32
TOR70153H Injector Pump Gear Puller
Loosen the nut on the injector pump gear, then use this
t
ool to loosen the pulley from the tapered shaft on the
injector pump.
TOR70153H
Figure 33
Engine Page 3 - 16
Rev. B
Groundsmaster 455-D