Toro Outcross 9060 Series - Using the Operation-Mode Selector

UsingtheOperation-Mode
Selector
Note:Themachinemustcometoastopbeforeyou
canchangethemodes.
Important:LeavingthemachineinInchModeor
SetupModedisablesthenormalcleaningprocess
ofthediesel-particulatelter(DPF).Leavingthe
machineineithermodecanplugtheDPFand
initiateaparkedregeneration.
Usethemodeselectortochangethemachine
operationstatusortosetupattachments.Themodes
areasfollows:
AttachmentMode
UseAttachmentModetoselectthespecictypeof
attachmentorwhenattachmentsareinstalledand
beingmovedtotheworksite.ToaccessAttachment
Mode,turntheoperation-modeselectortotheA
position(Figure36).
Note:Changingattachmentsmountedtothe
Outcrossmayrequiretheinputofapinnumber.
Note:DrivingthemachineinAttachmentMode
operatesthesameasdrivinginLowAutomotive
ModewhenthePTOswitchisintheOFFANDDISABLED
positionandtheauxilaryhydraulicleverisinthe
NEUTRALposition.
g250707
Figure36
36