Toro Outcross 9060 Series - Cleaning the Cab Air Filters; Cleaning the Cab Condenser Filter; Replacing the Dome Light

CleaningtheCabAirFilters
ServiceInterval:Every400hours
1.Removetheknobsandgratesfromthecabrear
overhang(Figure118).
g251432
Figure118
1.Filter
3.Grate
2.Knob
2.Removetheairltersfromthecab.
3.Cleantheltersbyblowingclean,oil-free,
compressedairthroughthem.
Important:Ifeitherlterhasahole,tear,or
otherdamage,replacethelter.
4.Usetheknobsandgratestoinstallthelters
intothecab(Figure118).
CleaningtheCab
CondenserFilter
Thepurposeofthecabcondenserlteristoprevent
largedebris,suchasgrassandleaves,fromentering
thecabcondenserandcondenserfans.
1.Pullthescreencoverstraightdown.
2.Cleanthecondenserlterwithwater.
Note:Donotuseapressurewasher.
Important:Ifthelterhasahole,tear,or
otherdamage,replacethelter.
3.Allowtheltertodrybeforeinstallingitintothe
machine.
4.Rotatethelterscreenaroundthetabsuntil
thelatchlocksintothelatch-mountassembly
(Figure119).
g253677
Figure119
1.Latch-mountassembly
3.Screencover
2.Condenserlter
ReplacingtheDomeLight
Note:RefertothePartsCatalogfortheappropriate
bulbpartnumber.
1.Useascrewdrivertoremovethelightlensfrom
thecontrolpanel.(Figure120)
g253616
Figure120
1.Screwdriver
3.Lens
2.Bulb
2.Removethebulbfromthelightbase(Figure
120).
3.Installanewbulbintothelightbase.
4.Installthelensintothecontrolpanel.
80