Toro Outcross 9060 Series - Using the 3-Point Hitch

g250500
Figure27
1.Lockcollar(driveshaft
yoke)
3.Driveshaftyoke
2.Splines(PTOoutputshaft)4.Shield
4.Whilepullingbackthelockcollar,pushthe
driveshaftyokeforwardandslipthesocketof
theyokeoverthesplinesofthePTOoutput
shaft(Figure27).
5.Ensurethatthelockatthedriveshaftyokesnaps
intothegrooveofthePTOoutputshaftsecurely.
6.Ensurethattheshieldispositionedoverthe
driveshaftyoke(Figure27).
Usingthe3-PointHitch
3-Point-HitchSpecications
Description
Specication
Category
2
Liftcapacity1,135kg(2,500lb)
Liftpoint61cm(24inches)
InstallingSpacersforCategory1
Attachments
Bydefault,Category2attachmentscanbesecuredto
the3-pointhitch.TosecureCategory1attachments
tothe3-pointhitch,youmustrstinstallspacers
(Figure28)asfollows:
•Installthetop-linkspacer(2.22cmor7/8inch)to
thetoplink.
•Installthelift-armspacers(1.91cmor3/4inch)
totheliftarms.
g310304
Figure28
1.Top-linkspacer
2.Lift-armspacers
Note:Ifyoumisplacethespacers,refertoyour
authorizedTorodistributorforadditionalspacers.
InstallingaRear3-Point
Attachment
Note:TheInchModeKithelpswithinstallinga3-point
attachment.ContactyourauthorizedTorodistributor
formoreinformationabouttheInchModeKit.
1.Slowlybackthemachineupandalignthedraft
linkstothelowerconnectionsoftheattachment
(Figure29).
Youcanadjustthedraftlinksoutwardtohelp
withsecuringthelinkstotheattachment.T o
adjustthedraftlink,pressonthelatchandmove
thelinkout(Figure30).
28