Toro Outcross 9060 Series - After Operation; After Operation Safety; Exiting the Machine

CancelingaParkedorRecoveryRegeneration
UsethePARKEDREGENCANCELorRECOVERYREGENCANCELsettingtocancelarunningparkedorrecovery
regenerationprocess.
1.AccesstheDPFRegenerationmenu,scrolldowntothePARKEDREGENoptionortheRECOVERYREGEN
option.
2.PressthenextscreentocancelaParkedRegenorcancelaRecoveryRegen.
AfterOperation
AfterOperationSafety
•Beforeleavingtheoperatingposition,dothe
following:
–Parkthemachineonalevelsurface.
–MovetheshiftlevertotheNEUTRALposition.
–Engagetheparkingbrake.
–Lowerallattachments.
–Shutofftheengineandremovethekey.
•Allowtheenginetocoolbeforestoringthemachine
inanyenclosure.
•Donotstorethemachinewherethereisanopen
ame,spark,orpilotlight.
•Keepallpartsofthemachineingoodworking
conditionandallhardwaretightened.
•Maintainandcleantheseatbeltsasnecessary.
•Replaceallworn,damaged,ormissingdecals.
ExitingtheMachine
WARNING
Improperlyexitingthemachinecancause
injury.
Alwaysusethehandleandsteptoexit
themachine.Toavoidinjurywhileexiting,
maintaina3-pointcontact:1handonthe
handleand2feetonthestep.
ExitthemachineasshowninFigure64.
g256168
Figure64
1.Handle
2.Step
51