Toro Outcross 9060 Series - Using Attachments

FillingtheBucket
RefertoFigure62forthisprocedure.
1.Positionthebucketleveltotheground.
2.Driveforwardandinsertthebucketintothepile
ofmaterial.
3.MovetheshiftlevertotheREVERSEposition.
4.Drivethemachineinreversewhileusingthe
joysticktoraisetheloaderarmsandcurlthe
bucket.
g250727
Figure62
DumpingaLoad
Todumpaload,movetheloaderjoysticktotheright.
Afterdumpingtheload,backthemachineawayfrom
theloadandmovetheloaderjoystickupandtothe
lefttolowerandcurlbackthebucket.
UsingAttachments
Note:RefertotheSoftwareGuideforinstructionson
addingandeditingattachmentparameters.
Toroacceptsnoliabilityformachinedamageor
personalinjurythatresultsfromtheuseofother
manufacturerattachments.Theuseracceptsthe
burdenoftheserisks.
•Eachtimeanattachmentorimplementismounted,
checkthe3-point-hitchmovement.Ensurethat
thereisnointerferencewithhosesandattachment
partswhenoperatingthe3-pointhitch.
Important:YoucandamagethePTOshaft
ifyouoperateattachmentsattoohighor
lowofanangle.Alwaysreadtheattachment
Operator’sManualforinstructionson
operatingthePTOshaft.
•Attachmentscanchangethestabilityandthe
operatingcharacteristicsofthemachine.
•Keepyourhandsandfeetawayfrommoving
attachments.
•Locatethepinchpointareasmarkedonthe
tractionunitandattachmentsandkeepyourhands
andfeetawayfromtheseareas.
•ReadtheattachmentOperator’sManualbefore
youusetheattachment.
Important:IncorrectPTOshaftlengthcancause
machineand/orattachmentdamageandpersonal
injury.
DANGER
Entanglementintherotatingdriveshaftcan
causeseriousinjuryordeath.
•Keephandsandfeetawayfromany
rotatingparts.
•Ensureallguardsareinstalledandall
rotatingshieldsrotatefreely.
•Beforeyouperformadjustmentsor
maintenance,shutofftheengine,remove
thekey,waitforallmovingpartstostop,
andensurethatthereisnomovementin
thedriveshaft.
45