Toro Pro Force 44553 - Carbon Canister Service; Replacing Carbon Canister Air Filter; Replacing Purge-line Filter

•Iftheair-lterelementisclean,installthe
lterelement,refertoInstallingtheAirFilter
(page26).
•Iftheair-lterelementisdamaged,replace
thelterelement;refertoReplacingtheAir
Filter(page26).
ReplacingtheAirFilter
1.Removetheair-lterelement;refertoServicing
theAirCleaner(page25).
2.Inspectthenewlterforshippingdamage.
Note:Checkthesealingendofthelter.
Important:Donotinstalladamagedlter.
3.Installthenewairlter;refertoInstallingtheAir
Filter(page26).
InstallingtheAirFilter
Important:Topreventenginedamage,always
operatetheenginewiththecompleteaircleaner
assemblyinstalled.
Important:Donotuseadamagedelement.
Note:Cleaningoftheusedair-lterelementisnot
recommendedduetothepossibilityofdamagetothe
ltermedia.
1.Cleanthedirtejectionportlocatedonthe
air-ltercover.
2.Removetherubberoutletvalvefromthecover,
cleanthecavity,andreplacetheoutletvalve.
3.Inserttheair-lterelementintoair-lterhousing
(Figure20).
Note:Ensurethatthelterissealedproperly
byapplyingpressuretotheouterrimofthelter
wheninstallingit.Donotpressontheexible
centerofthelter.
4.Aligntheair-cleanercoverwiththeair-cleaner
housing(Figure20).
5.Securethecovertothehousingwiththelatches
(Figure20).
ServicingtheCarbon
Canister
ReplacingtheCarbonCanisterAir
Filter
ServiceInterval:Every200hours
1.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
2.Removeanddiscardthecarboncanisterair
lter,butretainthehoses(Figure21).
g029820
Figure21
1.Carboncanister2.Carboncanisterairlter
3.Installthenewairlterandthepreviously
removedhoses.
ReplacingtheCarbonCanister
Purge-lineFilter
ServiceInterval:Every200hours
Note:Checkthepurge-linelteroccasionallyfordirt.
Ifthelterappearstobedirty,replaceit.
1.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
2.Movethespring-typehoseclampsonbothsides
ofthecarboncanisterpurge-linelterawayfrom
thelter(Figure22).
26