Toro Pro Force 44553 - Machine Assembly; Mounting the Hitch

DANGER
Batteryelectrolytecontainssulfuricacid,
whichisfatalifconsumedandcauses
severeburns.
•Donotdrinkelectrolyteandavoid
contactwithskin,eyesorclothing.
Weareyeprotectionandrubber
gloves.
•Fillthebatterywherecleanwateris
alwaysavailableforushingtheskin.
2.Attachthepositivecable(redcable)tothe
positive(+)terminal.
3.Attachthenegativecable(blackcable)tothe
negative(-)terminalofthebattery.
4.Coattheterminalsandmountingfastenerswith
Grafo112X(skinover)grease(T oroPartNo.
505-47)topreventcorrosion.
5.Installthebatterycoverandsecurewiththe
clips.
2
MountingtheHitchtothe
Machine
Partsneededforthisprocedure:
1Machineassembly
1Hitch
2
Bolt(3/8x3inches)
2
Flangenut(3/8inch)
Procedure
1.Positionthemachineonaat,levelsurface.
2.Insertthehitchtubeintotheframebrackets
(Figure4).Securethetubetotheframewith2
bolts(3/8x3inches)andangenuts(3/8inch).
g020731
Figure4
1.Framebrackets2.Hitchtube
3.Routethewireharnessalongtherightsideof
thehitchtube(Figure5).
g020732
Figure5
1.Wireharness2.Harnessclips
4.Plugtheharnessclipsintotheholesintheside
ofthehitchtubetosecureit(Figure5).
5.Storetheharnessconnectorinthehitchtube
holster(Figure6).
9