Toro procore sr54 - Storage Stand Removal and Latch Lock; Removing Storage Stands (SR72); Installing the Latch Lock

g010857
Figure33
1.Bolts3.Nut
2.Lockwasher
4.Storagestand
3.Removethestoragestands.
4.Usethestoragestandswheneveryouremove
theaeratorfromthetractionunit.
PreparingModelSR72
1.Raisetheaeratorroller(s)7.5to15cm(3to6
inches)offtheground.Placesupportblocks
undertheroller(s).
2.Removethebolts,lockwashers,andnuts
securingthestoragestandstoeachendofthe
aerator(Figure34).
g010967
Figure34
1.Bolts3.Nut
2.Lockwasher
4.Storagestand
3.Removethestoragestands.
4.Usethestoragestandswheneveryouremove
theaeratorfromthetractionunit.
Note:Wheninstallingthestoragestands,
ensurethatthestandsmounttotheinsideofthe
rollerplatessothatthelowerframetuberests
onthetopofthestands.
Note:ModelsSR54-SandSR70-Sdonothave
storagestands.
17
InstallingtheLatchLock
CEOnly
Partsneededforthisprocedure:
2Lockplate
2Tapbolt
2Retainingring
Procedure
1.Positionthelatchplateoverthehoodlatchwhile
aligningthemountingholewiththeholeinthe
sideplate(Figure35).
g016161
Figure35
1.Retainingring3.Latchplate
2.Mountinghole4.Tapbolt
2.Securethelatchplatetothesideplatewithatap
boltandaretainingring(Figure35).
3.Repeattheprocedureontheotherhoodlatch.
20