Toro Reelmaster 5410-D - Cutting Unit Pivot Locking; Lift-Arm Chain and Reel Motor Installation

g375239
Figure27
1.Lynchpin
3.Liftarm
2.Lift-armshaft
4.Washer
7.Insertthepivotyokeintotheliftarm,andsecure
shafttothearmwiththelynchpinandwasher.
8.Repeatsteps1through7fortheotherrear
cuttingunit.
LockingtheCutting-UnitPivotfor
CuttingGrassonaHillSide
Lockthecutting-unitpivotstopreventthecuttingunits
fromrotatingdownhillwhencuttingacrossthefaceof
ahill.Usetheholeinthepivotyoke(Figure28)lock
thecuttingunit.Usetheslotforasteeringcuttingunit.
g375251
Figure28
1.Snapper-pinpositions
3.Slot(pivotyoke)
2.Hole(pivotyoke)
InstallingtheCuttingUnitLift-Arm
Chains
Securethelift-armchaintothechainbracketwiththe
snapperpin(Figure29).
Note:Usethenumberofchainlinksdescribedinthe
cuttingunitOperator'sManual.
g003948
Figure29
1.Lift-armchain3.Snapperpin
2.Chainbracket
InstallingtheReelMotors
1.Coatthesplineshaftofthereelmotorwithclean
grease.
2.OilthereelmotorO-ringandinstallitontothe
motorange.
3.Installthemotorbyrotatingitclockwisesothat
themotorangesclearthebolts(Figure30).
g004127
Figure30
1.Reel-drivemotor2.Mountingbolts
4.Rotatethemotorcounterclockwiseuntilthe
angesencirclethebolts,andthentightenthe
bolts.
Important:Makesurethatthereelmotor
hosesarenottwisted,kinked,oratriskof
beingpinched.
5.Torquethemountingboltsto(27to33ft-lb).
18