Toro Reelmaster 5410-D - Fuel-Pickup Tube Reassembly

CleaningtheInstallingthe
Fuel-PickupTube
1.Cleanthescreenattheendofthefuelpick-up
tube(Figure127).
g373881
Figure127
2.Carefullyassemblethefuelpick-uptubeand
oatintothefueltank(Figure128).
g373886
Figure128
1.Cap(fuelsender)
3.Alignthettingsforthepick-uptubeandreturn
tubeinboard.
4.Tightenthefuel-sendercaptothefueltank.
5.Assemblethehoseontothettingsofthefuel
sender,andsecurethehosestothettingswith
theclamps(Figure129).
g373882
Figure129
1.Hoses
3.Fitting(fuelsender)
2.Clamp
6.Plugtheconnectorofthefuel-senderharness
intotheconnectorofthemachinewireharness
(Figure130).
g373884
Figure130
1.2-pinconnector(machine
wireharness)
2.2-socketconnector(fuel
sender)
7.Aligntheholesinthefuel-sendercoverwiththe
holesinthefueltank,andsecurethecoverto
thetankwiththe5Phillips-headscrews(Figure
131).
72