Toro TimeCutter SW4200 User Manual

CHASSIS
3-1
Toro TimeCutter SW/SWX Service Manual
3
Model & Serial Number Identication
The model and serial number identication plate is
located on the frame, near the battery, under the
operator’s seat as shown below (Fig. 005).
Fig. 005 PICT-1034
Grease & Lubrication Point
Grease Type – No. 2 general-purpose lithium base
grease
A grease tting is located on each of the front wheel
hubs.
The front wheel hubs should be greased every 25 hrs.
(Fig. 006)
Fig. 006 PICT-1035

Toro TimeCutter SW4200 Specifications

General

Cutting Width	42 inches
Fuel Capacity	3 gallons
Transmission	Hydrostatic
Cutting Height	1.5 to 4.5 inches
Warranty	3-year limited
Type	Zero-turn riding mower