Toshiba 2000 V Series - S Controller Interface Buffer Memory Configuration

52
model 2000 DeviceNet Module Manual (DN611/DN611A)
Chapter 4 Operating Procedures for the DN611 (Software)
4
4.2 S Controller Interface Buffer Memory Configuration
The operation of DN611 control and data input/output using the S controller is basically
performed by reading and writing the S controller interface buffer memory with MREAD
and MWRITE instructions.
Figure 4-5 Interface between Controller and DN611
Semaphore
area
RAS
information
area
Input/output
data area
DN611 S controller
Module control
request
Module control
res
p
onse
RAS information
Output to slave
Input from slave
・MREAD instruction
・MWRITE instruction
(Function block)
User program
S controller
interface
buffer memory