Toshiba 2000 V Series - Connecting Network Connector to the DN611

6F8C0845
33
3.4 Connection to the Network
3
3.4.2 Connecting network connector to the DN611
Insert the network connector into the device connector on front panel of the DN611. Note
that the network connector cannot be inserted upside down due to its structure. Do not
forcibly push it in. Tighten the network connector clamp screws to fix it in the DN611.
Figure 3-7 Attaching the Network Connector to DN611
ワーク
タ固定ネジ
Network
connector
clamp screws