30 ACE-tronics G9 ASD Installation and Operation Manual
Typical Connection Diagram
Figure 20. The ACE-tronics G9 ASD Typical Connection Diagram.
Note: The AM, FM, PP, RR, RX, and the P24 analog terminals are referenced to CC.
The isolated V/I analog terminal referenced to IICC.
F, R, I1, I2, I3, I4, I5, and I6 referenced to X2.
Note: When connecting multiple wires to any of ASD terminals, do not
connect a solid wire and a stranded wire to the same terminal.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
