Toshiba B-EP Series - 1. Scope; 2. Outline; 3. Operation Panel

8
4 Functions
Main Screen
Select [Start] - [All Programs] - [TOSHIBA TEC] - [B-EP Setting Tool] - [Setting Tool] to start the “B-EP Setting
Tool.”
Just after the tool has started, the [General] tab is opened and the default values for the printer used last time are
displayed in all setup items.
When the printer model differs from the model displayed in the title, settings may not be updated properly.
Confirm the printer model before updating the settings.
(1) Setup group
Select a group to which your setup item belongs to, from sorted groups such as [Image], [Notice] and
[Command].
When the box at the left of a group is checked, all items belonging to the group become active.
(2) Setup item
Items in the checked group become active.
You can select an option or enter a desired value or text to specify each item.
(3) [Set Param]
You can use this button to change a printer parameter for an active item.
Updating processing is performed for active setup items in checked groups.
(
1
)
(
2
)
(
3
)
(
4
)
(
5
)
(
6
)