42
Message List
Message Explanation
No printer connected. No printer is connected to the PC.
More than one printer connected. Connect only
one printer.
More than one printer is connected to the PC.
This tool is operable only when one printer is connected.
Printer is not ready. Check the printer mode and
status.
The printer is not ready to use functions.
Please check the printer command mode or status.
For details about functions and statuses, see page 1.
Incorrect value entered.
“Tab name”/“Group name”/“Setup item name”
An entry for the displayed setup item is incorrect.
[“Tab name”/“Group name”/“Setup item name”] indicates a
place where an error has occurred.
Check the setup item entry and conditions.
Retrieval of the setup information failed.
“Tab name”/“Group name”
Setup information was not retrieved from the printer.
[“Tab name”/“Group name”/“Setup item name”] indicates a
place where an error has occurred.
Check the printer and try to retrieve information again.
Update of the setup information failed.
“Tab name”/“Group name”/“Setup item name”
Setup information was not updated in the printer.
[“Tab name”/“Group name”/“Setup item name”] indicates a
place where an error has occurred.
Check the printer and try to update information again.
Some setup items cannot be updated depending on
printer models.
The bonding list is full. The number of information records exceeds the upper
limit.
Incorrect value entered. The PIN code entry for bonding is incorrect.
Check the entry.
Export of the setup information file failed.
Confirm the specified file is proper.
Setup information cannot be written in the specified file.
Check to see if the specified file is inaccessible to
unauthorized personnel.
Incorrect file specified. Setup information cannot be retrieved from the specified
file.
Check to see if the specified file is the one exported by
this tool.
Data transmission failed. Transmission of data in the specified file failed.
Check the printer and try to transmit the data again.
Memory allocation failed. Memory allocation command transmission failed.
Check the printer and try to transmit the data again.
Memory format failed. Memory format command transmission failed.
Check the printer and try to transmit the data again.
Maintenance counter clear failed. The maintenance counter cannot be cleared.
Check the printer and try to clear the counter again.
Parameter initialization failed. Parameter initialization failed.
Check the printer and try to initialize the parameter again.
To Next Page
Loading...
