26
Interface
[IrDA] Group
[IrDA I/F (Protocol)]:
Select whether or not IrDA communication is enabled.
To enable it, select the protocol.
Options: Disable
TEC Protocol
IrCOMM/IrOBEX
[(Max.) Baud rate]:
Set a baud rate for TEC Protocol communication or the maximum baud rate for IrCOMM/IrOBEX
communication.
The baud rate for IrCOMM/IrOBEX communication is adjusted to a value enabling communication by
the communicating device.
Options: 9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
To Next Page
Loading...
