Toshiba B-EP Series - 5.14 Various Parameter Settings

25
[Old Password]:
Enter the password currently set on the printer.
This password is set to cancel a password for entering SYSTEM mode.
Enter four characters from “0” to “F.”
Entries are not case-sensitive.
Since passwords are security information, they are displayed as asterisks except when they are being
entered.
To enable the new password, enter “0000.”
Range: 0000 to FFFF
[Module] Group
[Option Module]:
Select whether or not Bluetooth or wireless LAN optional module has been attached to the RS-232C
model.
Options: Disable
Enable
[SHELL] Group
[SHELL]:
This setting cannot be changed.
[Setting] Group
[Backlash Step 1]:
This setting cannot be changed.
[Backlash Step 2]:
This setting cannot be changed.