13
Tool
[Send File...]
This menu is used to send all data in the selected file to the printer.
During transmission, the progress screen is displayed.
You can stop transmission by clicking [Cancel].
When a confirmation message is displayed, click [Yes] or [No]. Note that transmission continues while the
confirmation message is displayed.
When transmission is successfully completed, the progress screen disappears and the main screen is
displayed.
When transmission fails, an error message is displayed.
Data already processed before transmission is canceled or fails are updated in the printer.
This menu is available regardless of mode and status of the printer.
[Memory...]
This menu is used to allocate and format memory.
For details, refer to Memory.
[Maintenance...]
This menu is used to confirm/clear the maintenance counter and initialize parameters.
This menu is available only when the printer is in SYSTEM mode.
For details, refer to Maintenance.
[Reset]
This menu is used to reset the printer.
This menu is available regardless of printer’s mode and status.
To Next Page
Loading...
