What does red flashing slowly mean on Toshiba B-EV4T?
If the red light is flashing slowly on your Toshiba Barcode Reader, it means an issue or feed was attempted with the top cover open. Close the top cover completely and press the [FEED] button.
Why is peel-off not working on my Toshiba Barcode Reader?
If the peel-off function isn't working on your Toshiba Barcode Reader when using the optional strip unit, it might be due to intense ambient light affecting the strip sensor. Fit the Shade Plate supplied with the strip unit to resolve this.
General| Power Supply | AC 100-240V, 50/60 Hz |
|---|---|
| Print Method | Thermal transfer and direct thermal |
| Resolution | 203 dpi |
| Print Width | 104 mm |
| Print Speed | 4 ips (inches per second) |
| Interfaces | USB, Serial (RS-232), Ethernet |
| Optional Interfaces | Wireless (Bluetooth, Wi-Fi) |
| Barcodes | Code 39, Code 128, UPC, EAN |
| 2D Codes | QR Code, Data Matrix, PDF417 |
| Operating Temperature | 5°C to 40°C |
| Storage Temperature | -20°C to 60°C |
Critical warnings about risks of death or serious injury and prohibited actions.
Step-by-step guide for initial setup, including powering on and off.
Instructions for connecting serial, parallel, USB, and Ethernet cables.
Initial steps for loading various types of media rolls and fanfold paper.
Guide to calibrating the printer's media sensors for accurate detection.
Detailed procedure for cleaning the critical print head element.
Common printer issues, their causes, and suggested solutions.
Understanding the meaning of indicator lamp colors and patterns for diagnostics.
Step-by-step instructions for safely removing jammed media from the printer.
To Next Page