Toshiba B-EX4 SERIES - Page 15

1. OUTLINE EO10-33024
1.5 ELECTRONICS SPECIFICATIONS
1-13
(6) USBH (Option)
1) Standard: USB V2.0
2) Transfer mode: Control transfer, Bulk transfer
3) Transfer rate: Full speed (12M bps)
4) USB interface Connector: USB-Type
A
Power supply specification: 500mA output
(7) Wireless LAN (Option)
1) Standard: IEEE802.11b/g
2) Protocol: Physical layer: 802.11b/g
Date link layer: CSMA/CA
Network layer: IP, ICMP, ARP
Transport layer: TCP, UDP
Application layer: Server: LPR, SOCKET, HTTP, FTP
Client: POP3, SMTP, DHCP, WINS
Agent: SNMP
Security: IEEE802.11i
Encryption: WEP (64/128bit), TKIP (WPA), AES (WPA2)
Authentication: Shared key (for WEP), PSK, PEAP, TLS, TTLS,
MD5, LEAP, EAP-FAST
3) Communicable distance: Class1, 100m (When there is no obstacle),
360 deg. (depending on conditions)
4) Antenna: Built-in (Not available for external antenna)
5) Certification: WiFi, CCX V3, V4
4) Sensor/switch
Transmittivesensor Transmittive(Movable/Adjustable)
Refrectivesensor Refrective(Movable/Adjustable)
Outer temperature
sensor
Detectrange:0to70℃
Head temperature
sensor
Detectrange0to80℃
Headupsensor Opticalslitsensor
Ribbon rotation
detectsensor
Opticalslitsensor(Ribbondiameterdetectionforrewinder,back
tensionblock)
Ribbonendsensor Refrective(Detectsilverareaofribbonendtape)