3. OPTIONAL KIT EO10-33024
3.2 PEEL OFF MODULE: B-EX904-H-QM-R
3-3
Media size(TBD)
Item
203-dpi model 305-dpi model
Head up function
Disabled Enabled Disabled Enabled
3ips: 87mm 3ips: 38mm 3ips: 94mm 3ips: 38mm
6ips: 99mm 6ips: 38mm 5ips: 102mm 5ips: 38mm
Min.
8ips: 113mm 8ips: 38mm
Label
Max.
1500mm
3ips: 30mm 3ips: 30mm
6ips: 30mm 5ips: 30mm
Min.
8ips: 38mm
Media pitch
Tag
paper
Max.
1500mm
Min.
30mm
Media width (Backing paper
width)
Max.
112mm
Min.
27mm
Label width
Max.
109mm
Min.
6mm
Gap length
Max.
20mm
Min.
2mm
Black mark length
Max.
10mm
Min.
130µm
Label
Max.
170µm
Min.
150µm
Media thickness
Tag
paper
Max.
290µm
3.2 PEEL OFF MODULE: B-EX904-H-QM-R
This strip module consists of the take-up block and the strip block. Installing the strip module enables
the printer to not only remove labels from the backing paper, but wind the tag paper or label with
backing paper onto the take-up spool by using the rewinder guide plate. The rewind full sensor is
provided to detect the overflow if the wound tag paper or label exceeds the specified amount is provide.
Swing: 32.8 mm
Rotary: 77.1 mm
Print Head
Pinch Roller
Feed Roller
To Next Page
Loading...
