3. OPTIONAL KIT EO10-33024
3. OPTIONL KIT
3-1
3. OPTIONAL KIT
Option Name Type Applicable Model Use
B-EX204-QM-R B-EX4T1/T2
Disc cutter
module
B-EX206-QM-R B-EX6T2
Rotary cutter
module
B-EX204-R-QM-R
B-EX4T1/T2
except HS
This cutter module uses a disc or rotary cutter.
It cuts backing paper of labels and tag paper
automatically in “Stop and cut” mode.
B-EX904-H-QM-R
B-EX4T1/T2
Peel off module
(with internal
rewinder)
B-EX906-H-QM-R B-EX6T2
This strip module strips the label from the
backing paper with the take-up block and strip
block. When the rewinder guide plate is
attached, the tag paper and label with backing
paper are wound.
Ribbon saving
module
B-EX904-R-QM-R B-EX4T1
The ribbon saving module moves the print
head up and down by using a solenoid to save
the ribbon loss as far as possible.
Expansion I/O
card
B-EX700-IO-QM-R All models
Installing this board allows connection to
external devices.
RTC/USB host
I/F card
B-EX700-RTC-QM-R All models Can be using the USB memory.
B-EX700-RFID-H1-QM-R
B-EX700-RFID-U2-EU-R
B-EX700-RFID-U2-US-R
RFID module
B-EX700-RFID-U2-CN-R
All models
Installing this module enables read and write
of RFID tags.
Narrow width
platen kit
B-EX904-PK-QM-R B-EX4T1
Linerless platen
kit
B-EX904-LP-QM-R B-EX4T2
Wireless LAN
Module
B-EX700-WLAN-QM-R All models
Installing this PC board allows a
communication by wireless LAN.
Parallel I/F
card
B-EX700-CEN-QM-R
All models
Serial I/F card B-EX700-RS-QM-R All models
NOTE: To purchase the optional kits, please contact the TOSHIBA TEC Head Quarters.
To Next Page
Loading...
