Toshiba B-EX4 SERIES Product Description

2. SUPPLY SPECIFICATIONS EO10-33024
2.4 SPECIFICATION OF RFID TAG (for B-EX700-RFID-H1-QM-R)
2- 10
2.4 SPECIFICATION OF RFID TAG (for B-EX700-RFID-H1-QM-R)
2.4.1 General Description
The RFID supplies are RFID tag (wireless IC tag) inlays designed to be converted into tag and label
applications. Printers, which are equipped with an RFID kit, can print data on the surface of RFID tags
as well as write data on them.
The B-EX series optional RFID kit, B-EX700-RFID-H1-QM-R, is destined for Europe and operates in
the UHF band 13.56MHz.
(RFID module and antenna are locally purchased.)
Although the specified frequency band can be used in the other countries than Europe, the destination
is limited to Europe because the certification is obtained only for Europe.
NOTE: Regarding the specification of RFID supplies and the ribbon used for printing on them, refer to
Section 2.1 MEDIA and Section 2.2 RIBBON.
2.4.2 Available RFID Tag
• TagSys C210, C220, C240, I-Code, Tag-it, ISO15693

Toshiba B-EX4 SERIES Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi
Max Print Width	104 mm
Connectivity	USB, Serial, Ethernet
Media Sensor	Transmissive, Reflective
Media Type	Roll, Fanfold, Tag, Ticket
Media Width	25.4 mm
Ribbon Width	110 mm
Ribbon Length	Up to 600 m
Media Thickness	0.06 – 0.19 mm