2. SUPPLY SPECIFICATIONS EO10-33024
2.1 MEDIA
2- 1
2. SUPPLY SPECIFICATIONS
Information regarding the supply specifications contained in Product Description is essential to service
engineers. Detail specifications and other information on the media and ribbon are described in Supply
Manual by model. It is issued by and sent from TOSHIBA TEC H.Q (Sales Division) upon release of
new model or manual's revision. When purchasing the supplies locally, be sure to refer to the Supply
Manual for details. Use of non-specified media may shorten the print head life and result in problems
with bar code readability or print quality. Be sure to read carefully and understand the Supply Manual
since it also includes the details about notes, precision of the print start position, limitations on printing,
etc. When selling the products to VARs, instruct them to buy media and ribbons that the substances
described in the following precautions are not included
2.1 MEDIA
Disc Cutter module for B-EX Series
Item
B-EX4T
Min.
25.4mm
Label
Max.
1500mm
Min.
25.4mm
Media pitch
Tag
paper
Max.
1498mm
Min.
30mm
75ｍｍ
Media width (Backing paper
width)
Max.
120mm 160mm
Min.
27mm 72mm
Label width
Max.
117mm 157mm
Min.
2mm
Gap length
Max.
20mm
Min.
2mm
Black mark length
Max.
10mm
Min.
130µm
Media thickness
Max.
170µm (IBEST-S)
Rotary cutter module for the B-EX4T
Item
203-dpi model 305-dpi model
Head up function
Disabled Enabled Disabled Enabled
3ips: 87mm 3ips: 38mm 3ips: 94mm 3ips: 38mm
6ips: 99mm 6ips: 38mm 5ips: 102mm 5ips: 38mm
Min.
8ips: 113mm 8ips: 38mm
Label
Max.
1500mm
3ips: 30mm 3ips: 30mm
6ips: 30mm 5ips: 30mm
Min.
8ips: 38mm
Media pitch
Tag
paper
Max.
1500mm
Min.
30mm
Media width (Backing paper
width)
Max.
112mm
Min.
27mm
Label width
Max.
109mm
Min.
6mm
Gap length
Max.
20mm
Min.
2mm
Black mark length
Max.
10mm
To Next Page
Loading...
Need help?
General
