1. OUTLINE SPTM-0152
1.5 ELECTRONICS SPECIFICATIONS
1-14
(6) USBH (Option)
1) Standard: USB V2.0
2) Transfer mode: Control transfer, Bulk transfer
3) Transfer rate: Full speed (12M bps)
4) USB interface Connector: USB-Type A
Power supply specification: 500mA output
(7) Wireless LAN (Option)
1) Standard: IEEE802.11b/g
2) Protocol: Physical layer: 802.11b/g
Date link layer: CSMA/CA
Network layer: IP, ICMP, ARP
Transport layer: TCP, UDP
Application layer: Server: LPR, SOCKET, HTTP, FTP
Client: POP3, SMTP, DHCP, WINS
Agent: SNMP
Security: IEEE802.11i
Encryption: WEP (64/128bit), TKIP (WPA), AES
(WPA2)
Authentication: Shared key (for WEP), PSK, PEAP, TLS,
TTLS, MD5, LEAP, EAP-FAST
3)
Communicable distance: Class1, 100m (When there is no obstacle),
360 deg. (depending on conditions)
4) Antenna: Built-in (Not available for external antenna)
5) Certification: WiFi, CCX V3, V4
4) Sensor/switch
Transmittive sensor Transmittive (Movable/Adjustable)
Refrective sensor Refrective (Movable/Adjustable)
Outer temperature sensor Detect range: 0 to 70°C
Head temperature sensor Detect range 0 to 80°C
Head up sensor Optical slit sensor
Ribbon rotation detect sensor Optical slit sensor (Ribbon diameter detection for rewinder, back
tension block)
Ribbon end sensor Refrective (Detect silver area of ribbon end tape)
To Next Page
Loading...
