1. OUTLINE SPTM-0152
1.4 BASIC SPECIFICATIONS
1-4
1.4 BASIC SPECIFICATIONS
1) Printing method ................... Thermal direct printing or thermal transfer printing
2) Print head
[GS model]
(1) Total number of dots ...... 832 dots (3) Effective print width ....... 104.0 mm
(2) Dot density ..................... 8 dots/mm (4) Thermal pitch .......…...... 0.125 mm
[TS model]
(1) Total number of dots ...... 1,253 dots (3) Effective print width ....... 104.0 mm
(2) Dot density ..................... 11.8 dots/mm (4) Thermal pitch .......…...... 0.085 mm
[HS model]
3) Print speed
GS model ............................. 3”/sec., 6”/sec., 10”/sec. 12”/sec.
TS model.............................. 3”/sec., 5”/sec, 8”/sec., 10”/sec. 12”/sec.
[HS model]
NOTE: These print speeds are available when printing ratio is less than 15% of the entire label or tag
paper.
4) Format size (W) x (L)
GS model ............................. Max. 104.0 mm x 1500.0 mm
TS model.............................. Max. 104.0 mm x 1500.0 mm
[HS model]
5) Issue mode .......................... Batch
Cut (Option)
Peel-off (Option)
6) Type of bar code/two dimensional code
(1)
JAN8, EAN8, JAN13, EAN13, UPC-A, UPC-E
(13)
PDF417
(2)
EAN8, EAN13, UPC-A, UPC-E + 2digit
(14)
QR Code
(3)
EAN8, EAN13, UPC-A, UPC-E + 5digit
(15)
Industrial 2 of 5
(4)
NW-7
(16)
Customer Bar Code
(5)
CODE39 (STANDARD)
(17)
POSTNET
(6)
CODE39 (FULL ASCII)
(18)
RM4SCC
(7)
ITF
(Royal Mail 4 State Customer Code)
(8)
MSI
(19)
KIX CODE
(9)
CODE93
(20)
Maxi Code
(10)
CODE128
(21)
Micro PDF417
(11)
EAN128
(22)
CP CODE
(12)
Data Matrix
(23)
GS1 Databer
(The composite is included.)
7) Bar code rotation ................. 0°, 90°, 180°, 270°
To Next Page
Loading...
Need help?
General
