3. OPTIONAL KIT SPTM-0152
3. OPTIONAL KIT
3-1
3. OPTIONAL KIT
Option
Name
Type Applicable Model Use
B-EX204-QM-R B-EX4T1/T2
Disc cutter
module
B-EX206-QM-R B-EX6T2
This cutter module uses a disc or
rotary cutter. It cuts backing paper
of labels and tag paper automatically
in “Stop and cut” mode.
B-EX904-H-QM-R B-EX4T1/T2
Peel off
module (with
internal
rewinder)
B-EX906-H-QM-R B-EX6T2
This strip module strips the label
from the backing paper with the take-
up block and strip block. When the
rewinder guide plate is attached, the
tag paper and label with backing
paper are wound.
Expansion
I/O card
B-EX700-IO-QM-R All models
Installing this board allows
connection to external devices.
RTC/USB
host I/F card
B-EX700-RTC-QM-R All models Can be using the USB memory.
B-EX700-RFID-H1-QM-R
B-EX700-RFID-U2-EU-R
B-EX700-RFID-U2-US-R
RFID module
B-EX700-RFID-U2-CN-R
All models
Installing this module enables read
and write of RFID tags.
Wireless
LAN Module
B-EX700-WLAN-QM-R All models
Installing this PC board allows a
communication by wireless LAN.
Parallel I/F
card
B-EX700-CEN-QM-R All models
Serial I/F
card
B-EX700-RS-QM-R All models
NOTE: To purchase the optional kits, please contact the TOSHIBA TEC Head Quarters.
To Next Page
Loading...
