3. OPTIONAL KIT SPTM-0152
3.6 RFID MODULE: B-EX700-RFID-U2-EU/US/CN-R
3-6
3.6 RFID MODULE: B-EX700-RFID-U2-EU/US/CN-R
Installing this module enables the printer to write data on an RFID tag as well as to print on the surface
of RFID supplies.
Applicable model:
(1) This optional device is intended for the following models:
B-EXT1-GS12-QM-R and B-EXT1-GS12-CN-R, RFID ready printer.
An RFID Ready printer can be identified by the model name sticker on the front of the printer.
Be careful not to install this product in the B-EXT1-TS15-R RFID Ready printers.
(2) The countries where the use of this device is allowed are as follows:
Model Name Frequency Band Applicable Countries
B-EX704-RFID-U2-EU-R
UHF 869.7 to 870.0MHz
(Center frequency: 869.85MHz)
EU member states and EFTA member states
B-EX704-RFID-U2-CN-R
UHF 920.625 to 924.375MHz
(Center frequency: 922.5MHz)
China
B-EX704-RFID-U2-US-R
(Serial Number:
2808Yxxxxxx and earlier)
UHF 902.75 to 927.5MHz
(Center frequency: 915.125MHz)
U.S.A., Canada
Destination Code Setting should be performed in the system mode of the printer according to the
destination.
The countries where the use of this device is allowed are as follows:
Model Name Setting Frequency Band Applicable Countries
US UHF 902.75 to 927.5MHz U.S.A., Canada
AU UHF 918.25 to 925.75 MHz Australia
KR UHF 910.4 to 913.6 MHz South Korea
B-SX704-RFID–U2-US-R
(Serial Number:
2809Axxxxxx or later)
TW UHF 922.25 to 927.25 MHz Taiwan
To Next Page
Loading...
