What causes a cover open error on Toshiba B-FP3D after closing the media cover?
A cover open error on your Toshiba printer after closing the media cover can occur if either side of the media cover is not locked (close the media cover until both sides of the cover click in position) or if there is a media cover switch failure (replace the media cover switch).
What to do if Toshiba B-FP3D Printer [FEED] button does not function?
If the [FEED] button on your Toshiba printer is not working, first, ensure that the [FEED] button is depressed completely (press the [FEED] button more strongly). If that doesn't work, replace the CPU PC board assembly or Drive PC Board.
Why is the print tone uneven on my Toshiba B-FP3D?
Uneven print tone on your Toshiba printer could be due to a dirty print head (clean the print head), a print head failure (replace the print head assembly), or a platen failure (replace the platen).
What causes a print error in the feed direction on a Toshiba B-FP3D Printer?
A print error in the feed direction on your Toshiba printer may be caused by failure in the motor idler gear, platen idler gear, idler gear, or platen gear (replace the motor idler gear, platen idler gear, idler gear, or platen gear), print head failure (replace the print head assembly), or platen failure (replace the platen).
General| Print Technology | Direct Thermal |
|---|---|
| Print Resolution | 203 dpi (8 dots/mm) |
| Print Speed | Up to 6 ips (152.4 mm/sec) |
| Connectivity | USB, Bluetooth |
| Operating System Compatibility | Windows, Android, iOS |
| Emulations | TPCL |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Memory | 8 MB Flash |
| Supported Barcode Types | 1D and 2D barcodes |
| Supported Media Types | Label |
| Power Supply | Battery pack |
Contains CE, FCC, and regional compliance statements for the printer.
Essential safety advice for operating and handling the printer and its components.
Information on proper product and battery disposal as per WEEE directive.
Safety and usage rules for Bluetooth and WLAN modules.
Detailed technical specifications for BT800 and GS2100MIP modules.
Technical specifications for label and receipt paper, including widths and lengths.
Guidelines for storing media to maintain quality and handling to prevent damage.
Details on basic specifications, physical dimensions, weight, and electronics.
Information on wireless modules, interfaces, and media supply capabilities.
Instructions for cleaning the print head, platen, strip shaft, and media path.
Guidance on cleaning the printer's top cover and operation panel.
Explains LCD messages, Wi-Fi signal, Bluetooth status, and transmission indicators.
Details on using the POWER, FEED, and PAUSE buttons for printer control.
Step-by-step instructions for loading and unloading the battery pack.
How to charge the battery pack using optional adapters or chargers.
Guide for properly inserting media rolls and adjusting paper guides.
Instructions for preparing and using the optional label peel-off unit.
Guide for attaching the belt clip and optional shoulder strap.
Instructions for USB connection and wireless communication setup.
Common error messages and steps to resolve them.
Solutions for problems like the printer not turning on or communication failures.
To Next Page
