Toshiba e-studio 202L - Automatic Paper Feed Copying

e-STUDIO200L/202L/230/232/280/282 GENERAL OPERATION June 2004 © TOSHIBA TEC
4 - 14
4.4.2 Automatic paper feed copying
Fig.4-5
Press [START] button
Developer bias ON
Main charger ON
Discharge LED ON
Main motor ON
Exit motor ON
Polygonal motor ON
Processing system
control
Transport system
control
Scanning system
control
Polygonal motor
normal rotation?
YES
NO
“CA10”
Call for service
Laser ON
Transfer charger ON
Transfer charger OFF
H-Sync
OK?
NO
YES
NO
Call for
service
“CA20”
Remaining set
number=0?
YES
Laser OFF
Processing system
control completed
Feed clutch ON
Feed clutch OFF
Registration clutch ON
Counter ON/OFF
Registration clutch OFF
Remaining set
number=0?
NO
YES
Exit sensor
detected leading
edge of paper?
OK
C
NG
“E010”
Paper jam
Cartriage move
forward
Carriage move
backward
Carriages stopped
Exposure lamp ON
Exposure lamp OFF
Scanning system
control completed