Toshiba e-studio 202L - Functions

e-STUDIO200L/202L/230/232/280/282 DRIVE SYSTEM June 2004 © TOSHIBA TEC
10 - 2
10.2 Functions
A: Drum cleaner unit drive ........ Drives the drum by transmitting the rotation of the main motor through
the gears to the drum flange gear. Also, drives the toner recovery
auger to transport the used toner to the developer unit.
B: Developer unit drive.............. Drives the developer unit by transmitting the rotation of the main motor
through the gears to the developer unit gears.
C: Fuser unit drive..................... Drives the fuser unit by transmitting the rotation of the main motor
through the gears and timing belt to the fuser unit gears. The bridge
unit, the job separator and the offset tray are driven by transmitting
from the fuser unit.
D: Registration roller drive ........ Drives the registration rollers by transmitting the rotation of the main
motor through the gears and clutches.
E: Transport roller drive............. Drives the transport roller by transmitting the rotation of the main motor
through the gears and clutches.
F: Feed roller drive.................... Drives the cassette feed roller by transmitting the rotation of the main
motor through the gears and clutches.