14
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 PAPER EXIT SECTION
14 - 5
14.5 Disassembly and Replacement
[A] Exit cover
[B] Paper exit unit
(1) Open the exit cover.
(2) Remove 1 clip and take off the exit cover.
Fig.14-4
(1) Take off the right rear cover
(! P.2-37 "[N] Right rear cover").
(2) Take off the exit cover
(! P.14-5 "[A] Exit cover").
(3) Remove 2 connectors, remove 3 screws and
then take off the paper exit unit.
Fig.14-5
Exit cover
Clip
Paper exit unit
To Next Page
Loading...
