Toshiba e-studio 202L - Initialization at Power-ON

6
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 SCANNER
6 - 7
6.3.3 Initialization at power-ON
The carriages move to their home positions and perform the peak detection.
Then they move to the carriage waiting positions and wait.
Fig. 6-8
YES YES
NO
YES
NO
NO
Power-ON
Carriage home
position sensor
ON
Carriage home
position sensor
OFF
Carriage home
position sensor
ON
Scan motor rotating
(
Carriage move forward
)
Scan motor rotating
(
Carriage move backward
)
Carriage home position
data set
Deceleration -> Stop
Move to peak detection
position
Move to carriage
waiting position
Peak detection
Completion of
initialization
Deceleration -> Stop
Error handling
Scanning command