2
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 OUTLINE OF THE MACHINE
2 - 51
2.6 Installation and Replacement of Options
[A] MR-3016 (Reversing Automatic Document Feeder (RADF))
(1) Turn the power OFF and unplug the power
cable.
(2) Take off the connector cover.
Fig. 2-69
(3) Disconnect the connector.
Fig. 2-70
(4) Remove 2 screws on the rear side.
Fig. 2-71
Connector cover
Connector
To Next Page
Loading...
