e-STUDIO200L/202L/230/232/280/282 SCANNER June 2004 © TOSHIBA TEC
6 - 18
[B] Lens cover
[C] Automatic original detection sensor (APS sensor)
[C-1] A4 series
(1) Take off the original glass
(! P.6-17 "[A] Original glass").
(2) Remove 6 screws and take off the lens
cover.
Fig. 6-21
(1) Take off the lens cover
(! P.6-18 "[B] Lens cover").
(2) Disconnect 1 connector from the SLG board.
(3) Remove 6 harness clamps.
Fig. 6-22
Lens cover
To Next Page
Loading...
