e-STUDIO200L/202L/230/232/280/282 DRIVE SYSTEM June 2004 © TOSHIBA TEC
10 - 6
(5) Remove 1 screw. Take off the bracket fixing
the registration clutch and bushing.
Fig.10-5
(6) Disconnect 2 connectors, remove 3 screws,
and then take off the main motor drive unit.
Fig.10-6
(7) Loosen 1 fixing screw of the tensioner and
remove the tension spring.
Fig.10-7
Bracket
Bushing
Connector
Screw
Screw
Screw
Drive unit
Tension spring
Fixing screw
To Next Page
Loading...
