Toshiba e-studio 202L - Page 286

e-STUDIO200L/202L/230/232/280/282 DEVELOPMENT SYSTEM June 2004 © TOSHIBA TEC
12 - 16
(13) Take off 3 gears and 1 timing belt.
Fig.12-26
(14) Remove 1 E-ring, 1 pin and 1 pulley.
(15) Take off the guide roller on the rear side.
Fig.12-27
(16) Remove the seal on the front side. Remove 1
E-ring and 1 bushing.
Fig.12-28
Timing belt
GearGear
Pulley
Guide roller
E-ring
Pin
Seal
E-ring Bushing