15
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0102)
15 - 11
[B] ADU inside rear cover
[C] ADU opening/closing switch
(5) Turn the hinge pin to point at the front side
and pull it out downward. Open the ADU and
take it off by sliding it to the rear side.
Fig.15-12
(1) Take off the ADU
(! P.15-10 "[A] Automatic Duplexing Unit
(ADU)").
(2) Remove 2 screws and take off the ADU
inside rear cover.
Fig.15-13
(1) Take off the ADU inside rear cover
(! P.15-11 "[B] ADU inside rear cover").
(2) Disconnect 1 connector. Release the latches
and take off the ADU opening/closing switch.
Fig.15-14
ADU
Pin
ADU inside rear cover
ADU opening/closing switch
To Next Page
Loading...
