15
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0102)
15 - 15
[H] Upper transport roller
(1) Take off the ADU drive unit
(! P.15-13 "[G] ADU motor / ADU drive
unit").
Fig.15-24
(2) Remove 1 clip on the rear side. Then remove
1 pulley and 1 pin.
Fig.15-25
(3) Remove 1 clip on the front side. Then take
off 2 bushings and upper transport roller.
Fig.15-26
ADU drive unit
Clip
Pulley
Pin
Upper transport roller
Bushing
Bushing
Clip
To Next Page
Loading...
