e-STUDIO200L/202L/230/232/280/282 OUTLINE OF THE MACHINE June 2004 © TOSHIBA TEC
2 - 34
[H] Right upper cover-3
[I] Upper rear cover
(1) Take off the rear cover
(! P.2-31 "[C] Rear cover").
(2) Remove 1 screw and take off the right upper
cover-3.
Fig. 2-31
(1) Take off the RADF or Platen Cover.
(2) Take off the left upper cover
(! P.2-32 "[D] Left upper cover").
(3) Take off the right upper cover-1
(! P.2-33 "[F] Right upper cover-1").
(4) Remove 2 screws and take off the upper rear
cover.
Fig. 2-32
Right upper cover-3
Upper rear cover
05/11
To Next Page
Loading...
