2
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 OUTLINE OF THE MACHINE
2 - 37
[N] Right rear cover
[O] Connecting port cover
[O-1] e-STUDIO200L/230/230L/280/280S
(1) Take off the right upper cover-3
(! P.2-34 "[H] Right upper cover-3").
(2) Open the transfer cover.
(3) Remove 2 screws and take off the right rear
cover.
Fig. 2-37
(1) Take off the right rear cover
(! P.2-37 "[N] Right rear cover").
(2) Remove 1 screw and take off the connecting
port cover.
Fig. 2-38
Right rear cover
Connecting port cover
05/11
To Next Page
Loading...
