2
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 OUTLINE OF THE MACHINE
2 - 55
[C] KD-1012 (Large Capacity Feeder (LCF))
(1) Turn the power OFF and unplug the power
cable.
(2) Remove 1 screw and take off the connector
cover.
Fig. 2-81
(3) Remove 1 screw and the ground wire, and
then disconnect 2 connectors.
Fig. 2-82
(4) Take off the lower drawer of the equipment.
Fig. 2-83
Connector cover
Drawer
04/07
To Next Page
Loading...
